LEVEL ANALOGUE GAUGES
 
Back to PRODUCTS ....CLICK IMAGE FOR PDF....

Model 28A - Remote Indicating Tank Contents Gauge with INTERNAL Transmitter 316L St St.

Mostly used to measure: Corrosive liquids, Chemical process plant, Printing inks & Potable water. Available with 100mm & 160mm dials

Model 28B - Remote Indicating Tank Contents Gauge with EXTERNAL Transmitter

Mostly used to measure: Fuel oil, Diesel, Kerosene, Paraffin, Lube oil, Chemical process plant, Corrosive liquids, Printing inks & Potable water. Available with 100mm & 160mm dials

Model 28C - Remote Indicating Tank Contents Gauge with flush diaphragm for Food & Chemical Applications

Mostly used to measure: Molasis, slurries, Corrosive liquids, etc. Available with 100mm & 160mm dials

Model 28D - Remote Indicating Tank Contents Gauge with INTERNAL Transmitter

Mostly used to measure: Fuel oil, Diesel, Kerosene, Paraffin, Lube oil & Water. Available with 100mm & 160mm dials

Model 28L Tank Contents Gauge is directly mounted into the side of the tank. Used mostly for storage tanks containing water or oil, and indicates the actual head of liquid above the gauge.

Model 28LV Tank Contents Gauge is usually directly mounted to the outlet pipe at the bottom of the tank to measure its contents. Mostly used for fuel oils.

Model 28LS Tank Contents Gauge is a direct mounted, diaphragm operated, 316L St St wetted parts gauge, used where the medium being measured is corrosive, highly viscous or contains solids in suspension. Only indicates the actual head of liquid above the gauge.

Model 28PU GAUGE Dial size 160mm. By operating a small hand pump, fixed at the bottom of the gauge, charges the system with air under pressure. The liquid is displaced from the balance chamber at the bottom of the tank, while excess air escapes via the tanks vent. The resulting pressure in the balance chamber is indicated by the gauge and is proportionate to the head of liquid in the tank. Requires a suitable balance chamber - see Data Sheet BC1

This method requires minimum installation time and gives important advantages in the safe measurement of volatile liquids.